How to Connect pTron Earbuds? pTron True Wireless Stereo (TWS) Earbuds redefine your audio experience, offering convenience and exceptional sound quality.
If you’re eager to connect your pTron Earbuds seamlessly, this step-by-step guide is designed to make the process smooth and hassle-free. Let’s get started!
How to Connect pTron Earbuds?
If you are having trouble connecting the earbuds, follow these steps to connect your ptron earbuds.
Step 1: Power On Your Earbuds
Begin the connection process by powering on your pTron Earbuds. You have two options:
- Option 1: Press and hold the Multifunction Button (MFB) on each earbud for 3 seconds.
- Option 2: Remove the earbuds from the charging case – they’ll power on automatically.
Upon successful power-up, a pleasant voice prompt will greet you with a reassuring “Power On.”
Step 2: Enter Pairing Mode
As your earbuds power on, they’ll enter pairing mode. In this mode, one earbud will flash Blue and Red lights alternatively, signaling their readiness to connect.
Listen for the voice prompt saying “pairing,” accompanied by a friendly beep, indicating your earbuds are eager to pair with your device.
Step 3: Enable Bluetooth on Your Device
Time to make your device discoverable! Head to your device’s settings and toggle on the Bluetooth feature.
Step 4: Search and Connect
- Browse the list of available Bluetooth devices on your device.
- Locate “pTron TWS” and tap to connect.
A delightful voice prompt will confirm your successful connection with the words “pTron TWS is Connected.”
Step 5: Reconnection (Optional)
The beauty of pTron Earbuds lies in their smart reconnection feature. Next time you use them, they’ll automatically reconnect to the last paired device if it’s within range. If not, they’ll wait patiently in standby mode for your device to return to the picture.
And there you have it! You’re ready to savor your favorite tunes, easily handle calls, or summon your virtual assistant.
Troubleshooting Tips
Encountering a bump in the road? No worries – here are some troubleshooting tips:
Bluetooth Not Searching:
- Ensure your earbuds are within a 1-meter range of your device.
- Check for Blue & Red light alternation. If it’s only flashing a Blue light, unpair from the old device first.
Auto-disconnection:
- Ensure your earbuds are fully charged.
- Give your phone and earbuds a restart.
- If issues linger, quickly resetting your phone’s Bluetooth settings may do the trick.
Device Connected but No Music/Calls:
- Confirm that both Call and Music functions are activated in your Bluetooth settings.
Single Earbud Plays:
- Unpair “pTron TWS” from your phone.
- Turn off Bluetooth on your device.
- Take both earbuds out together, wait for pairing, and reconnect.
Google Assistance/Siri Not Working:
- A simple device restart may resolve the issue.
- Check Google Assistance settings on your phone to ensure activation.
Mono Use:
- Take out one earbud and search for “pTron TWS” on your device.
Connecting your pTron Earbuds is a breeze, enhancing your audio experience with wireless freedom and immersive sound. Follow these steps and troubleshooting tips, and you’ll be quickly immersed in pTron TWS Earbuds!
How To Solve PTron Bassbuds One Side Not Connecting Pairing Issue
You’re immersed in the wireless freedom of your pTron Bassbuds, but suddenly, one earbud decides to take a break. Before you worry, let’s troubleshoot and fix this common issue.
Common Causes of pTron Bassbuds Single Earbud Not Working
Battery Discharge Discrepancy:
- Due to different power consumption during media playback, one earbud might discharge approximately 5 minutes earlier than the other.
- Solution: Charge both earbuds by placing them back into the power case and re-pair them with your device.
Mismatched Device Connection:
- Connecting one earbud to one device and the other to a different device can lead to a loss of the auto-pairing feature.
- Solution: Follow the steps below to reconnect the left and right earbuds.
Reconnecting Left and Right Earbuds
- Place both earbuds into the charging case, ensuring they are fully charged.
- Simultaneously pull both earbuds out of the charging case.
- Both L & R Earbuds will flash Blue & Red light alternatively. Wait for 10 seconds for the earbuds to reconnect/pair with each other.
- Once paired, only one earbud will flash blue & red light. Your Bassbuds TWS will resume normal operation.
Additional General Checks
- Side Balance:
- Ensure the audio speaker sides balance setting on your device is centered. If using a computer, check the balance settings.
- Track Type:
- Check if the track being played is mono, designed to play only on one side.
- Power Cycle and Reconnect:
- Power off/on the earbuds and reconnect them via Bluetooth.
Need Further Assistance?
If the above steps don’t resolve your pTron Bassbuds connectivity issues, don’t hesitate to reach out to our Technical Support Team for expert assistance.
- Email: [email protected]
- Phone: 040 – 67138888
Rest assured, following these steps will likely have your Bassbuds working seamlessly again. Enjoy your uninterrupted wireless experience!
How to Reset ptron Bassbuds
Unfortunately, there isn’t a specific “reset” button on the Ptron Bassbuds. However, there are a couple of methods you can try to troubleshoot common issues and get your earbuds working properly again:
Method 1: Reconnect the earbuds
- Make sure both earbuds are off and in the charging case.
- Open the charging case and take out the earbuds.
- Both earbuds should flash blue and red lights alternately.
- Wait for 10 seconds for the earbuds to reconnect to each other.
- Once they are connected, only one earbud will flash blue and red lights.
- Try connecting the earbuds to your Bluetooth device again.
Method 2: Forget and re-pair the earbuds
- On your Bluetooth device, go to the Bluetooth settings.
- Find the Ptron Bassbuds in the list of paired devices.
- Tap on the “Forget” or “Unpair” option.
- Open the charging case of the earbuds.
- Take out the earbuds and wait for them to enter pairing mode (they will usually flash blue and red lights).
- Search for the Ptron Bassbuds on your Bluetooth device again and select them to pair.
Method 3: Reset the earbuds to factory settings
Note: This method will erase all of your saved settings and connections.
- Make sure both earbuds are in the charging case but not charging.
- Press and hold both touch panels for 10 seconds until the LEDs flash red 3 times.
- The earbuds will automatically enter pairing mode.
- Search for the Ptron Bassbuds on your Bluetooth device and select them to pair.
If you are still having trouble after trying these methods, you can contact Ptron customer support for further assistance. read more information about prton earbuds
